Location: Brew Gentleman
Chris and Ryan met Asa Foster, Co-founder of Brew Gentleman, at the Jellybox group build event supported by 3DPPGH, and we have been thinking of a way to work with Asa ever since. Asa and Brew Gentlemen generously hosted our 1st Beer Coaster Design Challenge! The winners took home awesome prizes like a growler of Brew Gentlemen beer (from Asa), filament and merch (from MatterHackers), and bragging rights within the ‘burgh. In addition, Asa gave us a nickel tour of the Brew Gentleman brewery, and we learned why Brew Gentleman is Ryan’s favorite Pittsburgh brewery.
![](http://192.168.86.36:8001/wp-content/uploads/2022/04/17-1024x768.jpg)
We did have a couple of rules… All beer coaster designs and prints must:
- Use a Creative Commons license (CC BY)
- Be either a 3.5” circle or 3.5” rounded square w/ 0.25” radius
- Allow glassware to sit flat upon it
- Incorporate the Brew Gentlemen logo
The design submissions were rather awesome: dual filament, resin encapsulated, motorized with LEDs, chocolate, and sintered sugar with a saki binder… I repeat, “sintered sugar with a saki binder”.
A special shout-out goes to Chad Elish for taking some really awesome photos of the event.
Click here for the Google photo album.
Congratulations to the award winners:
![](http://192.168.86.36:8001/wp-content/uploads/2022/04/29-1024x768.jpg)
1st Place: Resin-filled Three River Topographical Coaster (Dillon Nichols)
Dillon 3D-printed a topographical map of Pittsburgh’s three rivers and then filled it with clear resin. It was so gorgeous that I could not imagine covering it with a beer glass… You can download his design on Thingiverse here.
![](http://192.168.86.36:8001/wp-content/uploads/2022/04/07-1024x768.jpg)
![](http://192.168.86.36:8001/wp-content/uploads/2022/04/27-1024x768.jpg)
2nd Place: Spinning, LED-Flickering, Rule Trolling Coaster (Jeff Bearer)
Jeff took his design to another level with the incorporation of LEDs and a motor to spin the beer as if it were on display. You can download his design on Tinkercad here.
![](http://192.168.86.36:8001/wp-content/uploads/2022/04/26-1-1024x768.jpg)
![](http://192.168.86.36:8001/wp-content/uploads/2022/04/06-1024x768.jpg)
Other Designs
![](http://192.168.86.36:8001/wp-content/uploads/2022/04/2018-10-15-21.59.08-1024x709.jpg)
Ryan’s Filament-Swapped and Buzzed Two-Tone Coaster is a dual extrusion design that incorporated a filament containing remnants from beer brewing. You can download his design from Thingiverse here.